Military Fluids
This product is a petroleum based jet engine oil manufactured with highly refined mineral oil meeting the highest standard of quality. An approved anti-oxidant is used to enable the finished product meet the severe corrosion and oxidation stability requirement of the jet engine.
- MIL FLUID 3050 is designed for use in jet engines and other high speed turbines where a mineral based fluid is required to function through a wide range of operating conditions.
- MIL FLUID 3050 has its excellent low temperature properties, good viscosity temperature behavior and resistance to oxidation.
- MIL FLUID 3050 is recommended for other high and low temperature operations, in high speed turbine engines
This product is available only by contract and is subject to export restrictions. Contact us for more information.
(0 Rating)
Starting from
Manufactured from the highest quality solvent refined paraffinic base stocks. These products offer excellent resistance to oxidation and rust, superior water demulsibility properties, and are fortified with a very effective non zinc additive to provide outstanding wear protection.
Intended for use in shipboard hydraulic systems not requiring the use of a fire resistant fluid. Also recommended for all types of gas or steam turbines (except those specifying extreme high temperature lubricants), air compressors, pumps, electric motor bearings, speed reducers, and as a general plain or antifriction bearing lubricant.
- Manufactured to meet MIL-PRF-17672E.
Contract only product. Subject to Restrictions.
(0 Rating)
Starting from
Manufactured from the highest quality solvent refined paraffinic base stocks. These products offer excellent resistance to oxidation and rust, superior water demulsibility properties, and are fortified with a very effective non zinc additive to provide outstanding wear protection.
Intended for use in shipboard hydraulic systems not requiring the use of a fire resistant fluid. Also recommended for all types of gas or steam turbines (except those specifying extreme high temperature lubricants), air compressors, pumps, electric motor bearings, speed reducers, and as a general plain or antifriction bearing lubricant.
- Manufactured to meet MIL-PRF-17672D.
- Variations Available: 2075th, 2110th, 2135th
Contract only product. Subject to Restrictions.
(0 Rating)
Starting from
TRIAX MIL FLUID F4600 is a blend of the highest quality, low viscosity, napthenic base stocks with a highly shear stable viscosity index improver and selected additives. TRIAX MIL FLUID F4600 formulation offers a product with exceptionally good viscosity temperature characteristics, controlled rubber swell, excellent oxidation stability and good anti-wear properties. TRIAX MIL FLUID F4600 is recommended in closed airless systems from -54 ˚C (-65˚F) to +135˚C (+275˚F) and in open systems up to +71˚C (160˚F.).
TRIAX MIL FLUID F4600 is intended for use in automatic pilots, shock absorbers, shock struts, brakes, flap control mechanisms, missile hydraulic servo-controlled systems, and other hydraulic systems using compatible elastomers and seals..
Qualified under Military Specification MIL-PRF-5606H
Contract only product. Subject to Restrictions.
(0 Rating)
Starting from
TRIAX MIL FLUID F4650 is a blend of the synthetic hydrocarbons, lubricant grade diesters and selected additives. TRIAX MIL FLUID F4650 formulation offers a product with exceptionally good viscosity temperature characteristics, complete shear stability, controlled rubber swell, excellent oxidation stability and good anti-wear properties. TRIAX MIL FLUID F4650 is recommended in closed systems from -65˚ F. to above +275˚ F. in open systems up to 350˚ F. (for short periods).
- The hydraulic fluid covered by this specification is intended for use in the tank recoil mechanism and hydraulic systems.
- The fluid is rust inhibited and may be used as a preservative medium for hydraulic systems and components.
- The hydraulic fluid covered by this specification is also intended for use in aerospace test stands..
Qualified under Military Specification MIL-PRF 46170
Contract only product. Subject to Restrictions.
(0 Rating)
Starting from
Qualified under Military Specification MIL-PRF-9000K is a petroleum based low viscosity hydraulic and preservative fluid for aircraft and ordinance use. F9001 formulation is a blend of selected petroleum base oils with additives to give the product, exceptionally good viscosity-temperature characteristics, good anti-wear properties, controlled rubber swell, good shear stability and excellent oxidation resistance. It has an excellent corrosion preventative property and provides a high degree of detergency to maintain clean system.
Intended for use in aircraft, ordinance and other general hydraulic uses, and for preserving hydraulic components. The Oil is used for testing and acceptance of hydraulic components intended for use in MIL-H-5606 services. It is used in hydraulic systems of missile ground support equipment where its preservative properties make it particularly suitable for long periods of inactivity encountered in this type of service
(0 Rating)
Starting from
This product is a blend of highly refined petroleum base stocks (Naphthenic and Paraffinic) with a high shear stable Viscosity index improver with selected additives. F9500 is a product with very good viscosity temperature properties, controlled rubber swell, resistance to corrosion & oxidation and wear protection
This product is designed for the hydraulic transmission of power; particularly in Naval ordnance hydraulic equipment. It provides corrosion protection in the presence of salt water and spray.
Qualified under Military Specification MIL-DTL-17111
(0 Rating)
Starting from
({{item.reviews.count}} Ratings)
({{item.reviews.count}} Rating)
(0 Rating)
Starting from
${{ item.default_variant.price_selling.verbose }}
No products found
Keep in touch
Follow us on:
Payment methods:
Property of TRIAX LUBRICANTS LLC. TRIAX® and the Red Eagle Logo is a
Registered Trademark of TRIAX LUBRICANTS LLC Copyright © 2024 All Rights
Reserved